Melanotan 2 Dosage: Complete Guide with Calculator & Chart

After researching Melanotan 2 dosage protocols for over 6 months and reviewing hundreds of forum posts, I found one thing clear: most people get their dosing wrong the first time.

The standard Melanotan 2 dosage is 0.25-0.5mg daily during the loading phase for 1-2 weeks, followed by 0.5-1mg once or twice weekly for maintenance.

The problem is that generic advice does not account for your specific goals, whether that is tanning, libido enhancement, or something else entirely.

In this guide, I break down the exact Melanotan 2 dosing protocols based on your objectives, plus step-by-step reconstitution instructions that even first-time peptide users can follow.

ContentsTable of Contents

1. 1What is Melanotan 2?→
2. 2Melanotan 1 vs Melanotan 2: Key Differences→
3. 3Melanotan 2 Dosage Chart→
4. 4Loading Phase Protocol→
5. 5Maintenance Phase Protocol→
6. 6Weight-Based Dosing Guidelines→
7. 7How to Reconstitute Melanotan 2?→
8. 8Supplies You Will Need→
9. 9Step-by-Step Reconstitution→
10. 10Reconstitution Dilution Options→
11. 11Melanotan 2 Dosage Calculator→
12. 12The Basic Formula→
13. 13Quick Reference for 10mg Vial with 2ml BAC Water→
14. 14How to Inject Melanotan 2?→
15. 15Best Injection Sites→
16. 16Injection Steps→
17. 17Optimal Timing→
18. 18Melanotan 2 Dosage by Use Case→
19. 19Tanning Protocol→
20. 20Libido Enhancement Protocol→
21. 21Erectile Dysfunction Protocol→
22. 22Melanotan 2 Side Effects and Management→
23. 23Common Side Effects→
24. 24Less Common Side Effects→
25. 25Managing Side Effects→
26. 26When to Stop?→
27. 27How to Store Melanotan 2?→
28. 28Before Reconstitution→
29. 29After Reconstitution→
30. 30Where to Buy Melanotan 2?→
31. 31Xcel Peptides – Best Value for Research-Grade MT2→
32. 32Xcel Peptides→
33. 33Pros→
34. 34Cons→
35. 35Best For→
36. 36Skip If→
37. 37Pure Lab Peptides – Best for Complete Supply Kits→
38. 38Pure Lab Peptides→
39. 39Pros→
40. 40Cons→
41. 41Best For→
42. 42Skip If→
43. 43What to Look for in a Peptide Supplier?→
44. 44Frequently Asked Questions→
45. 45How much Melanotan 2 should I take?→
46. 46How do you reconstitute Melanotan 2?→
47. 47How long does Melanotan 2 take to work?→
48. 48What are the side effects of Melanotan 2?→
49. 49How often should I inject Melanotan 2?→
50. 50Is Melanotan 2 safe?→
51. 51How do you store Melanotan 2?→
52. 52What is the difference between Melanotan 1 and 2?→
53. 53Final Thoughts on Melanotan 2 Dosage→

What is Melanotan 2?

Melanotan 2 (MT2) is a synthetic peptide analog of alpha-melanocyte-stimulating hormone (alpha-MSH) that stimulates melanin production in the skin.

Originally developed at the University of Arizona for potential skin cancer prevention, Melanotan 2 works by binding to melanocortin receptors throughout the body.

The MC1R receptor activation triggers melanin production for tanning effects.

The MC4R receptor activation is responsible for the sexual function and appetite suppression effects many users report.

Unlike traditional tanning, which requires UV exposure to stimulate melanin, MT2 primes your melanocytes to produce pigment more efficiently with less sun exposure needed.

Melanotan 1 vs Melanotan 2: Key Differences

The main difference between Melanotan 1 and Melanotan 2 is that MT1 primarily affects skin pigmentation, while MT2 has additional effects on libido and appetite.

Feature	Melanotan 1 (Afamelanotide)	Melanotan 2
Primary Effect	Skin pigmentation only	Pigmentation + libido + appetite
FDA Status	Approved for EPP (as Scenesse)	Not FDA-approved
Half-Life	Shorter (30-60 min)	Longer (several hours)
Tanning Pattern	More even, gradual	Faster, may be uneven
Sexual Effects	None	Significant
Side Effects	Fewer	More common (nausea, flushing)

Based on forum experiences, MT1 may be better for those wanting controlled, even tanning without sexual side effects.

MT2 is typically chosen when libido enhancement is also a goal, or when faster tanning results are desired.

Melanotan 2 Dosage Chart

The correct Melanotan 2 dose depends on your specific goals and experience level.

Here is the comprehensive dosage breakdown I have compiled from research protocols and user experiences:

Use Case	Loading Dose	Maintenance Dose	Frequency	Duration
Tanning (Beginner)	0.25mg	0.5mg	Daily, then 1-2x weekly	7-14 days loading
Tanning (Standard)	0.5mg	0.5-1mg	Daily, then 1-2x weekly	7-14 days loading
Libido Enhancement	0.5mg	1-2mg	Daily or as needed	Ongoing
Erectile Dysfunction	0.025mg/kg	0.025mg/kg	Max 4x monthly	48hr minimum between doses

Loading Phase Protocol

The loading phase builds up MT2 levels in your system to establish baseline pigmentation.

Start with 0.25mg (250mcg) daily for the first 3-5 days to assess your tolerance.

If tolerated well, increase to 0.5mg daily for the remainder of the loading phase.

The loading phase typically lasts 7-14 days, depending on your skin type and desired results.

Maintenance Phase Protocol

Once you have achieved your desired tan level, switch to maintenance dosing.

Maintenance typically involves 0.5-1mg injected 1-2 times per week.

Some users find they only need weekly dosing during summer months and can reduce to twice monthly during winter.

Weight-Based Dosing Guidelines

For more precise dosing, some protocols recommend weight-based calculations:

Body Weight	Starting Dose	Standard Dose	Maximum Daily
Under 150 lbs (68kg)	0.2mg	0.4mg	0.8mg
150-180 lbs (68-82kg)	0.25mg	0.5mg	1mg
180-220 lbs (82-100kg)	0.3mg	0.5-0.75mg	1.5mg
Over 220 lbs (100kg)	0.35mg	0.75-1mg	2mg

These are general guidelines based on available research and user experiences.

Individual responses vary significantly, so always start at the lower end and adjust based on your results and tolerance.

How to Reconstitute Melanotan 2?

Reconstitution is the process of mixing lyophilized (freeze-dried) Melanotan 2 powder with bacteriostatic water to create an injectable solution.

Supplies You Will Need

• Melanotan 2 vial: Typically 10mg lyophilized powder
• Bacteriostatic water: 10ml bottle (use BAC water, not sterile water)
• Insulin syringes: U-100, 29-31 gauge, 0.5 inch needle
• Alcohol swabs: For sterilizing vial tops and injection sites

Step-by-Step Reconstitution

1. Gather supplies: Have your MT2 vial, BAC water, insulin syringe, and alcohol swabs ready on a clean surface.
2. Clean the vial tops: Wipe both the MT2 vial and BAC water vial tops with alcohol swabs. Allow to air dry for 10-15 seconds.
3. Draw the water: Using a new insulin syringe, draw your desired amount of bacteriostatic water (see dilution table below).
4. Inject slowly: Insert the needle into the MT2 vial and inject the water slowly against the glass wall, not directly onto the powder. This prevents damaging the peptide.
5. Gently swirl: Do not shake. Gently roll the vial between your palms until the powder fully dissolves. This typically takes 1-2 minutes.
6. Refrigerate: Once reconstituted, store the vial in the refrigerator immediately. Use within 30 days.

Reconstitution Dilution Options

The amount of water you add determines your concentration and how easy it is to measure doses.

BAC Water Added	Concentration	0.25mg Dose	0.5mg Dose	1mg Dose
1ml	10mg/ml	2.5 units	5 units	10 units
2ml	5mg/ml	5 units	10 units	20 units
2.5ml	4mg/ml	6.25 units	12.5 units	25 units
5ml	2mg/ml	12.5 units	25 units	50 units

I recommend the 2ml dilution for most users. It provides a good balance between concentration and ease of measurement.

If you are new to peptides, the 2.5ml or 5ml dilution makes it easier to measure smaller doses accurately.

Melanotan 2 Dosage Calculator

Understanding how to convert milligrams to units on your insulin syringe is essential for accurate dosing.

The Basic Formula

Dose in units = (Desired dose in mg / Concentration in mg/ml) x 100

For a 10mg vial reconstituted with 2ml BAC water:

• Concentration = 10mg / 2ml = 5mg/ml
• For 0.5mg dose: (0.5 / 5) x 100 = 10 units

Quick Reference for 10mg Vial with 2ml BAC Water

Desired Dose (mg)	Desired Dose (mcg)	Units on Syringe	Number of Doses per Vial
0.1mg	100mcg	2 units	100 doses
0.25mg	250mcg	5 units	40 doses
0.5mg	500mcg	10 units	20 doses
0.75mg	750mcg	15 units	13 doses
1mg	1000mcg	20 units	10 doses

A single 10mg vial typically lasts 2-4 weeks during the loading phase, and 2-3 months during maintenance depending on your dosing schedule.

How to Inject Melanotan 2?

Melanotan 2 is administered via subcutaneous injection, meaning just under the skin into the fat layer.

Best Injection Sites

• Abdomen: 2 inches away from the belly button, avoiding the area directly around it
• Thighs: Front or outer thigh, middle third between hip and knee
• Love handles: Fatty area on the sides of the abdomen

Rotate between sites to prevent lipodystrophy (changes in fat tissue) from repeated injections in the same spot.

Injection Steps

1. Wash hands: Thoroughly wash with soap and water before handling supplies.
2. Prepare the dose: Draw your calculated dose from the reconstituted vial using a new syringe.
3. Clean injection site: Wipe the area with an alcohol swab and let it dry completely.
4. Pinch the skin: Gently pinch about 1-2 inches of skin to create a fold.
5. Insert needle: At a 45-90 degree angle (depending on body fat), insert the needle fully into the skin fold.
6. Inject slowly: Push the plunger steadily. Do not rush.
7. Remove and dispose: Pull the needle straight out and dispose of the syringe in a sharps container. Never reuse syringes.

Optimal Timing

Based on forum feedback, the best time to inject MT2 is 30-60 minutes before bed.

This timing allows you to sleep through the peak side effects (nausea, flushing) that occur 1-3 hours post-injection.

If using for libido enhancement, some users inject 2-4 hours before desired effects.

Melanotan 2 Dosage by Use Case

Your specific goals should dictate your dosing protocol.

Tanning Protocol

For tanning, the goal is to build up melanin production gradually while minimizing side effects.

Week 1-2 (Loading): Start at 0.25mg daily. If well-tolerated after 3-5 days, increase to 0.5mg daily.

Week 3+ (Maintenance): Once desired color is achieved, reduce to 0.5-1mg 1-2 times weekly.

Combine with 15-20 minutes of sun exposure or 5-10 minutes of tanning bed 2-3 times weekly for best results.

Some users report noticeable tanning within 5-7 days, while others take 2-3 weeks depending on skin type.

Libido Enhancement Protocol

The MC4R receptor activation responsible for libido effects may require slightly higher doses than tanning-only protocols.

Starting dose: 0.5mg daily for the first week to assess tolerance.

Target dose: 1-2mg daily or as needed, based on individual response.

Effects on libido typically begin within 1-4 hours after injection and may last 24-48 hours.

Erectile Dysfunction Protocol

For erectile dysfunction, research protocols have used weight-based dosing:

Standard dose: 0.025mg per kg of body weight (approximately 2mg for an 80kg person).

Frequency: Maximum 4 times per month with at least 48 hours between doses.

Effects typically onset within 1-5 hours and may last 24-48 hours.

Melanotan 2 Side Effects and Management

Understanding potential side effects helps you prepare and manage them effectively.

Common Side Effects

• Nausea: Most common, especially during the first 1-2 weeks. Usually subsides with continued use.
• Facial flushing: Temporary redness and warmth, typically lasting 30-60 minutes post-injection.
• Fatigue/yawning: Some users experience drowsiness 1-3 hours after injection.
• Appetite suppression: Reduced hunger is common and may last several hours.
• Spontaneous erections: In males, can occur 1-5 hours post-injection.

Less Common Side Effects

• Mole darkening: Existing moles may become darker. Monitor for changes in size, shape, or color.
• New freckles: Some users develop new freckles or small pigmented spots.
• Headaches: Occasionally reported, usually mild and temporary.
• Injection site reactions: Mild redness or itching at injection site.

Managing Side Effects

Based on extensive forum research, here are the most effective management strategies:

1. Start low: Begin at 100-250mcg to assess tolerance before increasing.
2. Inject at bedtime: Sleep through the peak side effects.
3. Take with antihistamine: Diphenhydramine (Benadryl) 30 minutes before injection may reduce nausea and flushing.
4. Stay hydrated: Drink plenty of water before and after injection.
5. Eat lightly: A small snack before injection may reduce nausea for some users.

When to Stop?

How to Store Melanotan 2?

Proper storage is essential to maintain peptide potency and safety.

Before Reconstitution

Lyophilized (powder) MT2 is relatively stable:

• Room temperature: Stable for several weeks
• Refrigerator: Stable for 12+ months
• Freezer: Stable for 2+ years

Keep away from direct sunlight and heat sources.

After Reconstitution

Once mixed with bacteriostatic water:

• Refrigerator (36-46F / 2-8C): Use within 30 days
• Never freeze: Reconstituted solution should not be frozen
• Protect from light: Store in original vial away from light

If using sterile water instead of bacteriostatic water, the solution must be used within 24-48 hours.

Where to Buy Melanotan 2?

Quality matters significantly with peptides. Based on my research, here are two reputable suppliers that provide third-party testing and proper documentation.

Xcel Peptides – Best Value for Research-Grade MT2

Xcel Peptides stands out for their combination of competitive pricing and quality assurance.

Their certificates of analysis verify purity, and the company offers phone, chat, and email support for any questions.

Best For

Researchers seeking high-purity Melanotan 2 at competitive prices with verified quality documentation.

Skip If

You are looking for clinical-grade pharmaceutical products or need the widest product selection.

Pure Lab Peptides – Best for Complete Supply Kits

Pure Lab Peptides differentiates itself through comprehensive quality procedures and the convenience of offering everything you need in one place.

Their cold-chain shipping ensures peptides maintain integrity during transit, which is especially important for temperature-sensitive products.

Best For

Researchers who want complete supply kits with bacteriostatic water, syringes, and alcohol swabs alongside their peptides.

Skip If

Budget is your primary concern, as their pricing is slightly higher than other vendors.

What to Look for in a Peptide Supplier?

When sourcing Melanotan 2, prioritize these quality indicators:

• Third-party testing: Independent lab verification of purity (should be 98%+ for research-grade)
• Certificate of Analysis (COA): Batch-specific documentation available for download
• Proper storage and shipping: Temperature-controlled handling, especially during warm months
• Responsive customer service: Ability to answer questions about products and documentation
• Secure payment: SSL-encrypted transactions with reputable payment processors

Frequently Asked Questions

Final Thoughts on Melanotan 2 Dosage

Getting your Melanotan 2 dosage right comes down to three key principles: start low, increase gradually, and listen to your body.

The standard protocol of 0.25-0.5mg daily during loading, followed by 0.5-1mg 1-2 times weekly for maintenance, works well for most users seeking tanning effects.

Those pursuing libido enhancement may need slightly higher doses in the 0.5-2mg range.

Remember that quality matters significantly with peptides. Always source from reputable suppliers that provide third-party testing and certificates of analysis.

And most importantly, monitor your body for any concerning changes, particularly with existing moles, and consult a healthcare provider if you have any concerns.

Disclaimer: Melanotan 2 is not FDA-approved for any medical use. This content is for informational and research purposes only. It is not intended as medical advice. Always consult a licensed healthcare provider before using any peptide or supplement. Individual results and experiences may vary.